Please support your Forums and purchase some Merchandise

Welcome, Guest. Please login or register.

News: Our OzIsuzu Forums Merchandise  help keep our forum going! :icon_thumleft:

Please register to join the community and see all of the OzIsuzu Forums
SimplePortal 2.3.7 © 2008-2024, SimplePortal

Author Topic: Caravan Roof Resealing - Fixed!!  (Read 5369 times)

0 Members and 1 Guest are viewing this topic.

Online maweida

Caravan Roof Resealing - Fixed!!
« on: Nov 15, 2022, 06:59:20 PM »
HI All,

Wanted to post about my recent win to fix my leaking caravan roof (yes, i know its a car forum, but most of us are vanners so hope this is useful for you).

My Jayco 16.49-3 Expanda developed a small drip on the joint between the roof (aluminium) and end panel (fibreglass), see photos. Unfortunately it dripped on the wife's sleeping bag... oops so needed to fix it.

The old sealant was quite chauky, and was very dirty (it was done by the original owner, say no more!).

I used a scraper (uses single sided razor blades) with brand new blades to remove the old sealant, it was very easy, just a case of getting the right angle (too steep and the razor wants to cut in to the fibreglass, too shallow and you'll leave some sealant behind). The painted surface did not scratch.

The difficult part was the 4mm rebated gap that i couldn't fit the razor blade in (see photos). I spend hours trying to remove it. Then i thought about making my own scraper, so used the angle grinder to cut a razor to 4mm wide to fit in the gap, this worked really well and removed all the sealant very quickly.

Next used sand paper (280grit) to remove any residual sealant and also to lightly scratch up the surface to allow a good bond.

Next i used 90% Ethanol (my local chemist provided a small bottle) to dissolve any old sealant and clean the joint.  I think any non residue alcohol will do the job (ie Isopropol, Metho, etc).

I was worried about leaving any residue, so gave the surface a light sand, then brushed the dust way.

Next i masked the area, since the join has 2 x different materials (different expansion rates), i decided to have a nice cap shape to the bead (see last photo), to allow greater flexibility (the wider the sealant, the higher the expansion allowable).

I made up a profile tool, using a old take way container (clear rectangle ones from the Chinese restaurant), and cut a nice radius using tin snips.

I used Sikaflex 221 (Bunnings), and filled up the joint, i used my finger to push up and down (pumping) along the seal to make the sealant stick to everything. I then used the profile tool to achieve the final shape.

Next was to get a spray bottle, with 30% dishwashing fluid (balance water), and spray the Sika, and your finger, and wipe along the seal. Since your finger won't stick, the Sika surface will become silky smooth and dirt won't stick down the track.

Next remove the masking tape, and use the dishwashing solution to blend any edges that have a lip from the masking tape. Note: The Sika won't stick where the dishwashing fluid is.

Waited 3 days for curing. NO leaks!!! and $29 bucks!  Hooray, now to book the next holiday down the coast!

see a few posts down for more info!










 

Offline JS

  • LS-T Member
  • ****
  • Join Date: Feb 2017
  • Location: Queensland
  • Posts: 352
  • Thanked: 104 times
  • Car Type: DMAX
Re: Caravan Roof Resealing - Fixed!!
« Reply #1 on: Nov 15, 2022, 08:45:02 PM »
That’s a fine job you’ve done there. Your attention to detail should pay off with no more leaking and a much better looking van.
Now , if the rain stops, you’ll be able to enjoy your camping again.
Cheers
Jim
2015 LST Auto, Drifta Drawers, Isuzu steel Bullbar,
Ironman Pro foam shocks, King springs, 30mm lift, Flexiglass canopy, Nilrust spray underbody and in tray
 
The following users thanked this post: maweida

Online maweida

Re: Caravan Roof Resealing - Fixed!!
« Reply #2 on: Nov 17, 2022, 10:46:58 AM »
Thanks Jim!
A bit more on this. So i got thinking that if I needed to do some small repairs (leak) down the track, would it be possible to bond new Sika to old Sika. I don't want to redo the entire joint, if only a small area was leaking (don't want to create new leaks, where there isn't a leak at present!).

Anyway, I did some testing, applied Sika 221 to a sanded/painted/aluminium trim and it stuck really well, waited 2 days, then applied Sika 221 again. It stuck very well. I did try cleaning the old Sika with Isopropyl but it didn't stick as well as untreated Sika,

Good news, if the old Sika is clean, it seems possible to do localised repairs without having to redo the entire seal.

 

Offline Aaron S

  • LS-U Member
  • ***
  • Join Date: Jul 2021
  • Location: Riverland, South Australia
  • Posts: 160
  • Thanked: 63 times
  • Car Type: DMAX
Re: Caravan Roof Resealing - Fixed!!
« Reply #3 on: Nov 17, 2022, 12:40:36 PM »
Silicon sticks to silicon as a general rule.

Excellent work on the repair.
 

Offline Ian G

  • LS-U Member
  • ***
  • Join Date: Aug 2017
  • Location: Melbourne
  • Posts: 132
  • Thanked: 31 times
  • Car Type: MUX
Re: Caravan Roof Resealing - Fixed!!
« Reply #4 on: Nov 17, 2022, 01:50:45 PM »
 Yes good job, it's all about the preparation. Sika 221 isn't silicon, you should be ok recoating if the sika is relatively new but if it has weathered for a couple of years I'd do what you have done. Sika has a good technical advice line that will give you all the info that you need
 
The following users thanked this post: maweida

Online maweida

Re: Caravan Roof Resealing - Fixed!!
« Reply #5 on: Sep 07, 2024, 04:05:31 PM »
Just finished resealing the front joint of the Expanda 16 footer.

Very similar to my first post, but some improvements.

- Used a scraper that takes a safety razor blade (bunnings) to strip the flat surfaces, change blades regularly and you'll save time.

- Because there is a gap (see photos), its difficult to remove the old sealant. HACK! ended up buying a small long nose vice grip 150mm plyers from bunnings ($19) to hold the razor blade,  then used an angle grinder to grind the razor (actually an 18mm stanley knife blade) to around 3mm blade length. i couldn't get the blade to slide nicely, and realised that i had to grind the plyers (at the nose) to lower the angle slightly.

- Used 1/3 parmolive and 2/3 water in a spray bottle to finish off the surface, nice and smooth and less chance of mould etc.

- Used an ice cream container lid to shape the final bead. Just cut the lid in half, then used snippers to shape a nice radius, I'm going large beads now, as the longer the bead the more expansion the joint can tolerate.

- Used Sika 221 again, its lasted about 2 years now (my first repair), and looks like new.

Pro job, very happy!




 

Online maweida

Re: Caravan Roof Resealing - Fixed!!
« Reply #6 on: Sep 09, 2024, 10:03:21 AM »
Was thinking... again.

Since Sikaflex is paintable, i could just paint the new sealant, this way the paint can protect the sealant from UV (sun). Might last forever so i don't have to do it again!!
 

 

SimplePortal 2.3.7 © 2008-2024, SimplePortal